Skip to content
AJM Training Services

Forklift Online TCR

Call Us: 1800 770 301
  • Home
  • Forklift TCR
    • Attachment Audit
    • Reach Stacker
    • TEST PME TCR
  • InCab
    • Tug Truck
  • Buggy
  • FEL
    • Gantry Crane
  • Resources
    • Rack Inspect
    • TCR Questions
    • Certificate Print
    • CoR Questions
    • CoR Certificate Print
    • Question Upload

Form is successfully submitted. Thank you!
Reach Stacker
Reach Stacker, ISO Container handler
Step 1 of 5
Company Details
Operator Details
 Upload
% Completed0
 Upload
% Completed0

Equipment Details
 
Performance Criteria
Unit 1 - Conduct Pre-Operational Checks
Observation Elements
- Capacity plate on Reach Stacker and compliance plate on attachment
- Underneath Reach Stacker fluid / oil leaks
- Warning decals
- Condition of boom / attachment /locking pins
- Boom assembly & twist locks condition
- Tilt and lift systems check for damage/leaks/wear (Hydraulic Rams)
- Structure and overhead guard (Falling Object Protection & Roll Over Protection)
- Tyres condition and pressure
- Engine oil / Hydraulic oil level
- Brake fluid / Power steering fluid (If accessible)
- Coolant
- Battery water level and connections
- Transmission oil (If accessible)
- Fan belt obstructions
- Air filter indicator (if diesel)
- Condition of seat and seat belt
- Mirrors clean & not cracked
- Hydraulic lines for any damage
- Fire suppression system / Fire Extinguisher (If fitted)
- Attachment condition - Attachment locks / sensors / secure fittings
POST START CHECK
- Adjust seat and mirrors
- Identify controls
- Functioning Lights & warning signals(if fitted) (Test)
- Forward & Reverse movement
- Warning devices – Horn / Reversing Beeper (Test)
- Gauges (Check)
- Brakes and hand brake (Test)
- Steering (Test full lock to lock)
- Attachment functionality
- Functioning hydraulic lever controls (Test)
Unit 2 - Attachment Use
Observation Elements
- Checks Capacity plate is readable and ensures correct forklift capabilities
- Checks for attachment compliance plate and is readable
- Has been approved for the use of attachments
- Ensure correct forklift use for attachments
- Can explain 3 elements for checking before using any attachment
- Understands correct procedure for use of safety cage
- Understands lever control lockout process for safety cage
- Selects the correct forklift / attachment for the correct task
- Understands requirements for the use of a Jib attachment
Unit 3 - Inspect Site and Work Plans
Observation Elements
- Checks for obstacles / hazards / ground condition
- Apply controls for obstacles / hazards / ground conditions
- Know and use site Traffic management procedures
- Wear required PPE (High Vis, Safety glasses etc)
- Understands stacking height requirements
- Identifies rapid roller doors and the correct procedure for entry(If applicable)
 
Unit 4 - Equipment Operations
Observation Elements
- Seat belt is worn correctly
- Check over both shoulders prior to reversing
- Observe - Checks corners / blind spots / pedestrians / traffic
- Smoothness of vehicle operation
- Acceleration sense
- Correct use of warning devices
- Maintains safe distance from other vehicles and pedestrians
- Enter / Exit load smoothly without biding
- Load positioned correctly relative to attachment before lifting
- Load placed in stack location correctly
- Load removed from stack location correctly
- Load stacked correctly
- Raise attachment correctly
- Lower attachment correctly
- Ensure Attachment is lowered to correct travel height
- Load traveled at correct height (below axle height)
- Speed - Travel speed to conditions
- Control - Maintains safe control at all times
- Ensure correct use of Park brake
- Ensure correct control used
- Ensure checks of rear end swing
- Good steering control
- Observation and Planning used
- Confidence Level
- Ensure understands correct use of LOTO
- Ensures load is secured
- Good attitude towards Reach Stacker safety & operations
Unit 5 - Obstacles & Control Checks
Observation Elements
Remove load from block stack/racking location and relocate into block stack/racking location at a different level.at the Trainers request
- Empty load from a block stack/racking location
- Replace load back into block stack/racking location

Three (3) varied loads suitable for the M.H.E weighting at least 50% of the rated capacity.
- Lift 1: From Floor
- Lift 2: Medium Level. (Not less than 50% of machine's height capacity)
- Lift 3: High Level. (Not less than 75% of machine's height capacity)
 
Unit 6 - Shutdown Equipment
Observation Elements
- Parks Reach Stacker in correct location
- Lower attachment to the ground
- Appropriate gear is selected when parking the vehicle
- Applies Park Brake
- Engine power is turned off
UNIT 7 - Secure the Site
Observation Elements
- Understands where not to park a forklift
• First Aid facilities /Refuelling Station
• Access points / Emergency Fire Exits
• Walkways / Blind Corners
- Mounts / Dismounts Correctly (Using 3 points of contact)
Unit 8 - Refuelling / Battery Charging
Observation Elements
- Shuts down forklift as per shutdown procedure
LPG
- Correct PPE worn when refuelling LPG cylinder
- Follows SWP when refuelling forklift
- Understands correct emergency procedures
Electric
- Follows SWP when connecting to a battery charger
- Follows SWP when disconnecting from a battery charger
- Understands when to top up battery water levels(before Charging)
- Understands correct emergency procedures
 
Unit 9 - Questionnaire

Final Outcome

Signatures
On signing this training/assessment course completion form, it is acknowledged that the above-named training course has been completed by the named Operator.
 

Hosted by Custom Web Hosting